Your quick guide to changing settings in touchless faucets

Wondering how to change the flow time or adjust the recognition range of your touchless faucet? Here’s a quick guide.

We put together a simple step-by-step guide to help you change the settings of your touchless faucet – both for newer Bluetooth®-equipped models and older generations.

Touchless faucets with Bluetooth

For more information, visit apps.oras.com.

Touchless faucets without Bluetooth

Changing settings to older touchless faucet models requires a magnetic key.

If your touchless faucet doesn’t include Bluetooth connectivity, here’s how to change settings:

There are several setting options available, depending on your faucet model. You can find more information about how to change your factory settings in the installation manual or by contacting Oras technical support directly. For now, let’s walk you through an example on how to change flow time and cleaning mode settings for the Oras Electra 6188/6189 wall-mounted spout faucet.

How to change the maximum flow time from 120 seconds to 60 seconds

 The maximum flow time for touchless operations can be changed from 10 seconds to up to 300 seconds. See below the instructions for changing the settings from 120 seconds (the factory setting) to 60 seconds.

• Place your hand in front of the sensor, then place the magnetic key (which is included with the faucet) between the sensor lenses. Once the key has been identified, the faucet will switch off and a red light will switch on.
  
  If the key is lost, a new magnetic Oras magnetic key can be purchased from your local dealer/wholesaler.
  
• Hold the key in place until the red light starts flashing, then remove the key.

• Put the key back and wait for the green light to flash twice.

• Remove the key and place it back between the lenses, waiting for the red light to flash three times.

• The lights will now flash for the set number of times and the flow time adjustment is now completed.

How to change touchless faucet’s maximum flow time from 120 seconds to 60 seconds.

How to change the cleaning mode from 30 seconds to 60 seconds

•  Place your hand in front of the sensor

• Hold the key in place until the red light starts flashing, then remove the key.

• Put the key back and wait for the green light to flash 5 (five) times.

• Remove the key.

• Once again, place the magnetic key in between the sensor lenses and wait for the red light to flash 3 (three) times.

• Remove the key. The light will flash for the set number of times (consult the table on the manual below to see other options for cleaning mode time).

How to change cleaning mode time from 30 seconds to 60 seconds in a touchless faucet.

Find out more about the several setting options available to you in the table below.

Different setting options for the wall-mounted Oras Electra

It’s always good to have all practicalities at hand. We hope this quick guide can help you change settings in a Bluetooth-enabled or older generation touchless faucet.